68 Forwarding your callsEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 01• use the internal number of your voice mail as the destination when you programForward no Answer and Forward on busyor• make the ring delay greater than the delay used by your voice mail system, ifyour voice messaging system or service automatically retrieves callsDisplaysLine RedirectionLine Redirection allows you to send your external calls to a telephone outside theoffice. You may choose to redirect all your external lines or only some of them.Line Redirection takes precedence over the Call Forward feature. If both featuresare active on a set, incoming external calls on redirected lines are routed to thespecified Selective Line Redirection (SLR) external destination. Incoming internalcalls are forwarded to the specified Call Forward destination.You cannot use the Line Redirection feature on either a M7100 telephone or atelephone connected to an Enterprise Edge ATA2 or an Enterprise Edge ASM.Turning on Line Redirectionƒ°›1. Press ƒ°›.2. Select the outgoing line to be used for redirected calls.3. Enter the number to which calls are redirected (the ways you can do this arelisted below).4. Select the lines to be redirected.Enter the telephone number to which you want to redirect calls, using one of thefollowing methods:• Press an external autodial button.There are several reasons why you may get thismessage. For instance, you cannot forward your callsto a telephone that has been forwarded to yourtelephone.Your calls are being forwarded to telephone 221.Two or more telephones are linked in a forwardingchain, and one of them is out of service or is beingused for programming.For other displays, see Common feature displays on page 149.Forward deniedForward>221CANCLNot in service
