P0908510 Issue 01 Enterprise Edge Feature Programming Telephone GuideCommon feature displaysYou may see the following displays when you use a feature.Someone is already using programming, or the feature you are tryingto use is not compatible with the configuration of the telephone orline.You have tried to use a feature, but you have not been given accessto it in administration programming.You have taken more than 15 seconds to press a button in responseto a display.You have entered a feature code that is used by an applicationprogram that your system does not have.You have entered an invalid feature code.You have tried to use a feature that is not available in the presentsetup of your Enterprise Edge system.You cannot use the feature you have chosen because yourtelephone is locked. See “Using Set lock” on page 123.Press £ or press VIEW‚ or ·VIEW to view a number that is too longto fit on the display. Press ˙ or OK when you are finished.This indicates a long distance call. (May be available with CallDisplay services.)You are receiving an internal call from telephone 239 forwarded bytelephone 221 or you have an Answer button for telephone 221 andan internal call from 239 is ringing on 221.You are connected to an internal call. Press TRANSFER to transferthe call.You are receiving a call from telephone 221.You have received a Ring Again offer for a call to an internaltelephone. Press the flashing internal line button or YES to call thenumber again. On the M7100 telephone, just lift the receiver.Otherwise, press NO or wait 30 seconds for the Ring Again offer toexpire. For an explanation of Ring Again, see “Using Ring Again” onpage 50.The person has not answered the camped call. The call has comeback to you. Press the line button or CALLBACK to reconnect to thecall.20Access deniedDenied in adminFeature timeoutInactive featureInvalid codeNot availableSet locked1234567890123...VIEW‚ OK§239>221221TRANSFER221 callingCall 221?YES NOCamped: 221CALLBACK
