Answering calls 31P0908510 Issue 01 Enterprise Edge Feature Programming Telephone GuideUsing a central answering position (CAP) moduleA central answering position (CAP) is an Enterprise Edge M7324 telephone and aCAP module that your installer or customer service representative programmed asa CAP. You can have five CAPs connected to an Enterprise Edge telephone. It isbest if the CAP is the prime telephone and direct-dial telephone for the lines andtelephones it serves.A CAP module is an add-on device that provides 48 extra memory or line buttons.You can connect one or two Enterprise Edge CAP modules to the telephone toincrease the number of lines it can handle.When a CAP module is first plugged into your telephone, some of the modulebuttons are already programmed to dial an internal number.Customizing your CAP moduleIf your installer has programmed the CAP module to be the central answeringposition for your system, you can move external lines onto the CAP module byusing ƒ•°⁄. See Moving line buttons on page 95.Any of the buttons on your CAP module that do not select lines can be programmedto dial internal or external numbers automatically. You can program features ontoCAP module buttons. See Time savers for making calls on page 51 andCustomizing your telephone on page 89 for information on programming memorybuttons.Buttons on a CAP module cannot be assigned as answer buttons.Monitoring telephones with the CAP moduleThe indicators ˆ beside internal autodial buttons on your CAP module show thestatus of Enterprise Edge telephones.The indicator is on when the telephone has:• an active call• Do Not Disturb turned on
