P0908510 Issue 01 Enterprise Edge Feature Programming Telephone GuideTroubleshootingUsing the alarm telephoneAn alarm telephone displays Enterprise Edge’s system alarm codes, should theyoccur. It is an Enterprise Edge telephone with a two-line display (M7310 or M7324telephones) that the installer has assigned as an alarm telephone.Note: Alarms are also stored in the WinNT Network Event log. For moreinformation, see the Enterprise Edge Programming Operations Guide.Reporting and recording alarm codesIf an alarm message appears on the alarm telephone’s display:1. Record the alarm number.2. Call your customer service representative and report the alarm code.DisplaysTesting the telephoneIf you suspect something is wrong with a button, the speaker, the displays, or someother part of the Enterprise Edge telephone hardware, you can do a quick test to seewhich part of the telephone is broken.Report this alarm and the time it occurred toyour installer or customer servicerepresentative.TipsEnsure that the function of a button matches its label by pressingƒ•‚and then the button to see its function.You can end the telephone testing session anytime by pressing ® orƒ unless you are testing those buttons. The test feature times-outafter 30 minutes of no activity.19Alarm: 61-4-2TIME
