42 Answering callsEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 011. Select Terminals & Sets.2. Select a DN number.3. Double-click Capabilities.4. Choose a Handsfree setting: None, Auto, Standard.There are three ways to set Handsfree for an individual telephone:Both Auto and standard Handsfree allow you to use a headset with an EnterpriseEdge telephone.A Handsfree/Mute button is automatically assigned to a telephone that isprogrammed with Handsfree and is always located in the lower right-hand cornerof the telephone.Handsfree AnswerbackHandsfree Answerback allows you to answer a voice call without lifting thereceiver. It is always turned off for a M7100 telephone.You can turn Handsfree Answerback on or off for a telephone that is programmedto use Handsfree.You need to start a Unified Manager session to program this feature. See GettingStarted on page 13 for more information.1. Select Terminals & Sets.2. Select a DN number.3. Double-click Capabilities.4. Choose an HF answerback setting: Yes or No.Handsfree is not available to the telephone.You can make or answer a call without having topick up the receiver or press ©. Thetelephone’s internal microphone and speaker turnon automatically when you press a line orintercom button to make or answer a call.A standard version of Handsfree described UsingHandsfree/Mute on page 40.For other displays, see Common feature displays on page 149.Handsfree:NoneCHANGEHandsfree:AutoCHANGEHandsfree:StdCHANGE
