90 Customizing your telephoneEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 01Changing the language on the displayYou can select the language used on the display of each Enterprise Edge telephone.Enterprise Edge software supports three languages: English, French and Spanish.Button caps are available for each language. When your system is first installed, alltelephones use English.If you program ƒ•fi‚⁄ on to a memory button, you can press thatbutton until the language you want appears on the display. You cannot programƒ•fi‚¤ or ƒ•fi‚‹ onto a memory button.EnglishPress ƒ•fi‚⁄.FrenchPress ƒ•fi‚¤.SpanishPress ƒ•fi‚‹.Programming a feature code onto a memory buttonYou can program a feature code onto a memory button. In some cases, pressing thebutton a second time cancels the feature.Programming feature buttonsƒ•‹Any memory button not programmed as an external or internal line, target line,Answer button, or Handsfree/Mute button, is available for features.1. Press ƒ•‹.2. Press the memory button you want to program with a feature.3. Enter the appropriate feature code you want to assign onto the button.The following feature codes cannot be programmed onto a memory button: LongTones and any code beginning with • except ƒ•fi‚⁄ (LanguageChoice) and ƒ•‡ (Contrast Adjustment).TipWhen you program a button with the line pool feature code, you must enter aline pool access code after the feature code. The programmed line pool buttonaccesses a specific line pool, not the line pool feature.
