Using System features 123P0908510 Issue 01 Enterprise Edge Feature Programming Telephone GuideMaking a telephone a hotline telephoneYou can set up a telephone as a hotline.You need to start a Unified Manager session to program this feature. See GettingStarted on page 13 for more information.1. Select Terminals & Sets.2. Select a DN number.3. Choose Capabilities.4. Double-click Hotline.5. Choose a setting: None, Internal, or External.Internal assigns an internal number.External assigns an external number. If you select an external number, you canselect the line on which the call is made: the prime line, an external line, a line in aline pool, or a line selected by the routing table. If you select a line pool, you mustspecify the line pool access code. If you select the routing table, the number dialedis treated as a destination code and is routed according to the routing tables.A telephone’s prime line, line pool access codes, and access to a line pool can beprogrammed by your installer.Control telephoneThe control telephone allows you to place the telephones and external lines forwhich it has responsibility into and out of service schedules. See Using alternate orscheduled services on page 117.Using Set lockSet lock limits the ways in which you can customize your telephone. There are threelevels of Set Lock: Full, Partial, and None. None allows you to access all featureson your telephone.TipA Hunt Group set DN can be specified as a Hotline telephone. For moreinformation on Hunt Groups see Programming Hunt Groups on page 101.
