P0908510 Issue 01 Enterprise Edge Feature Programming Telephone GuideUsing System featuresUsing alternate or scheduled servicesThere are three types of Services to make your Enterprise Edge system handle callsdifferently on different days and at different times of the day: Ringing service,Restriction service and Routing service.Each of the three services, and the six schedules available to each service, arecustomized for you by your installer. They program which telephone is used to turnServices on and off, and display what Services are in use. This is called the controltelephone.Preventing certain calls from being madeRestriction service prevents a user from making certain kinds of calls from atelephone or from lines that are available at the telephone. The restrictions areprogrammed by your installer.Making additional telephones ringRinging service makes additional telephones ring for incoming calls on externallines. For instance, all incoming external calls can ring at a security guard’stelephone during the night, or calls to one attendant can ring at another attendant’stelephone during lunch. It does not suppress your normal ringing assignment.Changing the lines used by outgoing callsRouting service allows you to assign alternate routes to calls. In this way you cantake advantage of lower costs available on particular routes on certain days and atcertain times. Both the regular and alternate routes are programmed by yourinstaller.Turning Services on and offThe master control for how different services and their schedules are used by yoursystem is in programming. There are three settings: Manual, Automatic and Off.• Manual allows you to turn the service on and off at any time from a controltelephone using a feature code.• Automatic allows you to use the preassigned stop and start time for a service.You are able to start and stop the service by entering the appropriate featurecode at a control telephone. If you select this setting, you use the start and stoptimes programmed by your installer.• Off prevents the service from being activated.You need to start a Unified Manager session to program this feature. See GettingStarted on page 13 for more information.16
