38 Answering callsEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 012. Press ®. The call is disconnected.3. Press the line button of the held call to speak to the remaining person.On a M7100 telephone:1. Press ƒ£‹, to place one caller on hold. Press ˙ again, to putthe caller you want to keep on hold.2. Press ®. The call is disconnected.3. Press ˙ to speak to the remaining party.Independently holding two callsFor all Enterprise Edge telephones except the M7100 telephone, you can put the twopeople in a conference call on hold independently so that they cannot talk to eachother.1. Press the line button of one person. The other person is automatically put onhold.2. Press ˙. The second person is put on hold.You can re-establish the conference.3. Take one call off hold.4. Press ƒ‹.5. Take the other call off hold.Putting a conference on holdYou can put a conference on hold, allowing the other two people to continuespeaking to each other by pressing ˙.You can reconnect to the conference by pressing either of the held line buttons. Forthe M7100 telephone, press ˙.Splitting a conferenceYou can talk with one person while the other person is on hold.On a M7208, M7310 or M7324 telephone• Press the line button of the person to whom you want to speak. The other personis automatically put on hold.On a M7100 telephone:
