150 Common feature displaysEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 01You are connected to an external call. Press TRANSFER to transferthe call.You are receiving an external call forwarded from telephone 221 oryou have an answer button for telephone 221 and an external call isringing on that telephone.The call on line 061 is being transferred to you by someone else inyour Enterprise Edge system.A camped call is waiting. Press the line button or use Call Queuingto answer the call. Press ˙ if you have a M7100 telephone.You tried to use Call Queuing but no call was ringing at yourtelephone.There is no call ringing at your telephone. If you have a flashing linebutton but your telephone is not ringing, press the line button toanswer the call on that line.The telephone to which you directed a call is not in service or isotherwise unavailable. The call is returned to your telephone.No one answered the call you parked. The call has come back toyou.You have used the Call Queuing feature without picking up thereceiver. Auto Handsfree has not been assigned to your telephone.You must use the receiver or © to answer a call.You are receiving a priority call. If you are on another call, inform theperson you are speaking to that you are about to put the call on hold.Press the flashing line indicator of the priority call or wait until the callconnects automatically (in eight seconds). The priority call goesthrough when you hear the next beep. Your active call is placed onExclusive Hold. It is reconnected automatically when the priority callends (unless you transfer the priority call, in which case you mustpress the line button of your original call to reconnect). Use DND(ƒ°fi) or press BLOCK to reject a priority call.You have no free line buttons on which to receive a call. Release oneof your current calls and try again to answer the incoming call.You have received a Ring Again offer for a line pool. Press theflashing internal line button or YES to use the line pool. On the M7100telephone, just lift the receiver. Otherwise, press NO or wait 30seconds for the Ring Again offer to expire.You cannot program a feature button while you are on a call.You have tried to use a feature while you were on a call or had callson hold. Release the call or calls, before using the feature.The line is in use. Make the call using normal methods or wait untilthe line is free.You have tried to make, receive or pick up a call when no line buttonwas available. Some features require you to have a button free.Releasing calls can free up line buttons.Line061TRANSFERLine061>221Line061 transferLine061 waitingNo calls waitingNo line selectedNot in serviceParked callCALLBACKPick up receiverPriority> 221BLOCKRelease a callUse line pool?YES NOHold or releaseRelease callsLine in useNo button free
