4. Use the cursor up or the cursor down key to select “Fax forwarding”.5. Press the Enter key.6. Enter the fax number of the destination fax.* You can enter the fax number using the keypad, abbreviatednumbers or one-touch keys. Chain dial keys can be used as well.If you enter the fax number using an abbreviated number orone-touch key that is already designated for F-Code BasedCommunication, you can skip steps 7 through 10.7. If you want to designate the operation as an F-Code BasedCommunication, press the SUBADDRESS key.> If you pressed the SUBADDRESS key, proceed to step 8.> If you DID NOT press the SUBADDRESS key, proceed to step 11on page 4-28.8. Enter the subaddress you want to use for this F-Code BasedCommunication.* The subaddress can be up to 20 digits in length and can includeany combination of the numerals 0 - 9.2. Use the cursor up or the cursor down key to select “Program faxparameter”.3. Then press the Enter key.4-27Section 4 Other Features of this Fax(1) RegisteringThe following procedure must be performed when registering FaxForwarding information for the first time.* If you want to cancel the procedure part way through, press theReset key. The operation panel will return to the initial mode settings.1. Raise both cover plates and press the REGISTER key.The “Program” menu will appear in the message display.Fax ForwardingFax Forwarding allows documents received during designatedhours to be saved into memory and automatically forwarded toanother fax number that is registered in advance. It is possibleto use F-Code Based Communication to forward the faxreception to the destination fax.* If the Fax Forwarding operation is not successful, the receiveddocuments will be printed out at your fax and then deleted fromyour fax machine’s memory.* With different types of communications such as EncryptedCommunication, etc., Fax Forwarding may not be availabledepending on the type of communication.* In order to use Fax Forwarding, it is necessary to turn it ON inadvance. (Refer to “(3) Fax Forwarding ON/OFF”, page 4-29.)Program:Endê Program abbreviated dialProgram one-touch keyProgram:Subaddress box registerProgram encryption codeê Program fax parameter PProgram fax parameter:Endê v :Own name :v :Enter destinationv :68945Enter destinationProgram fax parameter:Permit tel nr PPermit number Pê Fax forwarding PSubaddress:663520 digitsEnter subaddress numbers01-DEC-1999 12:00Set original
