* If you want to cancel the procedure part way through, press theReset key. The operation panel will return to the initial mode settings.1. Raise both cover plates and press the INFORMATION key.The “Communication information” menu will appear in themessage display.2. Use the cursor up or the cursor down key to select “Edit”.Then press the Enter key.3. Use the cursor up or the cursor down key to select “Program/Change”.Then press the Enter key.* If there are no communications that are using the timer currentlyin memory, an error message will appear and then the messagedisplay will return to the “Edit” menu.l Selecting the related communication4. Use the cursor up or the cursor down key to select the documentnumber that corresponds to the communication you want to modify.5. Press the Enter key. The items available for modification willappear in the message display.l Changing the scheduled start time6. If you want to change the scheduled start time, use the cursor upor the cursor down key to select “TX time”.Then press the Enter key.* If you DO NOT want to change the start time, this step is notnecessary. Proceed to step 9.7. Use the keypad to enter the desired time for the communication tobegin.* If you want to reset the displayed time to “00:00”, simply pressthe Stop/Clear key.8. Press the Enter key. The new time for the communication to beginwill be registered.* If you are finished modifying the contents of the communication,proceed to step 38 on page 2-13.2-11Section 2 Various Functions of this Fax(3) Modifying the Contents of the CommunicationYou can modify the information relating to a scheduledcommunication that uses the timer. Information can be changed,added, or the communication can be cancelled completely.The actual procedure and information available for modification isslightly different depending on the type of communication involved.The example in the procedure below is for a scheduled BroadcastTransmission that uses the timer. If you want to modify theinformation relating other types of communications, simply refer tothis example but follow the flow of the message display in order toperform the actual procedure.* Documents that are stored in a Confidential Box or that were receiveddirectly into memory CANNOT be deleted using this procedure.* You CANNOT modify a scheduled communication that is waitingfor Automatic Redialling, nor is it possible to modify a scheduledPolling Communication.Communication information:ê TX result displayReception reportEdit PEdit:ê PrintImmediate transmissionProgram/Change* You can enter fax numbers using the keypad, abbreviatednumbers, one-touch keys, group dial keys, chain dial keys andthe directory.TX time:18:30Enter transmission timeTX time:20:00Enter transmission timeProgram/Change: listê Doc. nr :005v :YDK P0313:00 BroadcastProgram/Change: Listê Doc. nr :017v :CRC P0518:30 BroadcastProgram/Change broadcast:Endê Broadcast list PTX time :18:30Program/Change broadcast:EndBroadcast list Pê TX time :20:0001-DEC-1999 12:00Set original
