(2) ProcedureRefer to the following example when entering characters during theregistration procedure for one-touch keys, abbreviated numbers, etc.[Ex.] To enter “Mt [G]”Press one-touch key No. 13 (marked with the letter “m”).An uppercase “M” will appear in the message display and thecursor will move to the next space.* You CANNOT enter a space as the first character.1-28Section 1 Basic Use of this FaxEntering Characters(1) Character TableCharacter entry is carried out with the one-touch keys.The characters registered under each one-touch key are as shown in the following table.* When entering characters, each one-touch key will always represent thesame characters regardless of whetherthe cover plates are raised or lowered.The symbols 1 - ^ and m in thistable refer to the following:1 MESSAGE TEL. key2 MANUAL RX. key3 MEMORY TX. key4 REGISTER key5 CONFIGURE key6 PRINT REPORTS key7 INFORMATION key8 No designation when both coverplates are raised9 BROADCAST key0 POLLING key! CONFIDENTIAL key@ RELAY BROADCAST key# DELAYED TX. key$ SUBADDRESS key% DUPLEX TX key^ ALTERNATE DISPLAY keym: The available characters will differdepending upon the language in usein the message display. (Refer to“Available Characters Table”,page 8-3.)One-touch keyNo.1, 33, 65 a rstuvwxyz. , ' "_ - + &/ ( ) :m18, 50, 22, 34, 66 b 19, 51, 33, 35, 67 c 20, 52, 44, 36, 68 d 21, 53, 55, 37, 69 e 22, 54, 66, 38, 70 fPress to entera single space23, 55, 77, 39, 71 g8, 40, 72 hPress to switch betweeninput of upper- andlowercase letters24, 56, 825, 57, 926, 58, 027, 59, !28, 60, @29, 61, #30, 62, $31, 63, %32, 64, ^9, 41, 7310, 42, 7411, 43, 7512, 44, 7613, 45, 7714, 46, 7815, 47, 7916, 48, 8017, 49, 1ijklmnopqCharacter CharacterOne-touch keyNo.11Enter destination nameMEnter destination name
