|
* If you want to cancel the procedure part way through, press theReset key. The operation panel will return to the initial mode settings.1. Press the CONFIGURE key.2. Use the cursor up or the cursor down key to select “Print report”.6-2Turning Report Print Out ON/OFFFive different reports can be printed out for checking such points aswhether a transmission or reception was accomplished correctly ornot. You can also have each of these reports printed outautomatically or turn OFF automatic print out of each report.3. Press the Enter key.4. Use the cursor up or the cursor down key to select which report to set.* The following example is for setting the Delayed CommunicationReport.5. Press the Enter key.6. Use the cursor up or the cursor down key to select whether or notyou want that report to be automatically printed out.* The asterisk (*) in the message display indicates the currentsetting.* If you want the report to be printed out automatically, select “On”.7. Press the Enter key. The setting for that report is complete.> If you want to continue the setting procedure for other reports,repeat steps 4 - 7.> If you want to perform other setting procedures, select “End” andthen press the Enter key.> If you are finished making settings, press the Reset key.The operation panel will return to the initial mode settings.Section 6 Various Settings and Registration in this FaxPrint report:TX transaction:OnRX transaction:Offê Delayed comm. :OnDelayed comm. report:ê*OnOffDelayed comm. report:*Onê OffPrint report:TX transaction:OnRX transaction:Offê Delayed comm. :OffPrint report:Endê Activity contr:OnManagement :OnSet fax:EndTTI :Outside p.ê Print report PSet this report to be printed out upon reaching a predeterminednumber of communications in order to check the details of thosecommunications.Set this report to be printed out in order to check the details,listed by id-code, of all communications occurring underRestricted Access.Set this report to be printed out after each transmission to checkwhether the transmission was accomplished correctly or not.Set this report to be printed out after each reception to checkwhether the reception was accomplished correctly or not.Set this report to be printed out after each communication thatuses the timer is scheduled to check the information related tothat communication.01-DEC-1999 12:00Set originalSet fax:Endê TTI :Outside p.Print report P
|
