CODE CAUSE AND/OR PROCEDURE FOR CORRECTIONBusy(U00000)The line is busy or the other party does not answer after automatically redialling the set number of times.Perform transmission or reception procedures again.Stopped(U00100) Transmission has been interrupted by pressing the Stop/Clear key.Stopped(U00200) Reception has been interrupted by pressing the Stop/Clear key.U00300 The destination fax has run out of recording paper. Check with the destination party.U00420 -U00462Connection was made on a call initiated by the transmitting party, but the transmission has been interrupted because thetransmitting party does not possess the necessary communication capabilities.Stopped(U00500)During multiple communication (Broadcast Transmission, Polling Reception, etc.), this unit was unable to transmit to alldestinations due to a communications interruption.U00600 -U00690 Communication was interrupted due to trouble with your unit. Perform transmission or reception procedures again.U00700 Communication was interrupted due to trouble with the other party’s fax unit. Check with the other party.U00800U00810 Unsuccessfully transmitted page(s) remain. Perform transmission procedures again.U00900U00910 Unsuccessfully received page(s) remain. Perform reception procedures again.U01000 -U01080 A communication error occurred during transmission. Perform transmission procedures again.Section 8 Reference Information8-8Error Code TablesWhen a communications error occurs, one of the following error codes will be printed out on thecorresponding Transmission Report or Reception report as well as the Activity report.Refer to the following tables for a more detailed explanation of the error.U01100 -U01199 A communication error occurred during reception. Perform reception procedures again.U01400A communication which uses the timer was scheduled, and a number was entered using an abbreviated number orone-touch key, etc., but communication with that party was impossible because that number was no longer registered whenthe scheduled time arrived. Check your unit.U01500 A communication error occurred during transmission at high transmission speed. Perform transmission procedures again.U01600 A communication error occurred during reception at high transmission speed. Perform reception procedures again afterhaving the transmitting party lower the transmission speed.U01700U01720 A communication error occurred during transmission at high transmission speed. Perform transmission procedures again.
