l One-touch keys* To use the one-touch keys for dialling, it is necessary to register, inadvance, the desired destination fax number under one of the one-touch keys.* If the alarm sounds and an error message appears in the messagedisplay, an unregistered one-touch key was pressed. Check thecorrect one-touch key and press that key.You can also enter the destination fax number with anabbreviated number. Simply press the ABBR./DIRECTORY keyand then use the keypad to enter the 3-digit abbreviatednumber (000 - 199) under which the destination fax number isregistered.* The transmission operation will begin automatically; there isno need to press the Start key.l Abbreviated numbers* To use abbreviated numbers for dialling, it is necessary to register,in advance, the desired destination fax number under anabbreviated number.* If the alarm sounds and an error message appears in the messagedisplay, an unregistered abbreviated number was entered.Check the correct abbreviated number and enter that number.1-22Section 1 Basic Use of this FaxDialling a destination fax numberUse the keypad to enter the destination fax number.* The destination fax number can be up to 32 digits in length.* If a mistake is made at any point in entering the fax number,press the cursor left or the cursor right key to move the cursor tothe desired position and enter the desired number, or press theStop/Clear key and enter the full number once again from thebeginning.* If you want to cancel the operation in progress, press the Reset key.The information entered up to that point will be cleared and theoperation panel will return to the initial mode settings.If you stopped the operation because you made a mistake in theprocedure, perform the procedure once again from the beginning.You can also enter the destination fax number with a one-touch key. Simply press the one-touch key under which thedesired fax number is registered.* The transmission operation will begin automatically; there isno need to press the Start key.66v :13579Document :A4Press START-key
