4-10Section 4 Other Features of this Fax(4) Reverse PollingReverse Polling involves a combination of standard transmission andPolling Reception. After documents are transmitted to theirdestination, documents that were pre-set in that other party’s fax aretransmitted automatically to the fax initiating the call (PollingReception).* Reverse Polling is only possible if the other party has firstperformed the necessary Polling Transmission operations.(Refer to page 4-5.)* If a start time is scheduled for the Reverse Polling operation,the Direct Feed Transmission mode will not be available.* If you want to cancel the procedure part way through, press theReset key. The operation panel will return to the initial mode settings.1. Set the documents you want to transmit.2. Raise both cover plates and press the POLLING key.The “Polling communication” menu will appear in the messagedisplay.3. Use the cursor up or the cursor down key to select “Reversepolling”.4. Press the Enter key.Polling communication:Cont. polling RXConfi. polling RXê Reverse polling01-DEC-1999 12:00Set original01-DEC-1999 12:00Document :A4Enter destination5. Enter the fax number of the other party.* You can enter the fax number using the keypad, abbreviatednumbers, one-touch keys or the directory. Chain dial keys can beused as well. However, you CANNOT enter the number of theother party’s fax with abbreviated numbers or one-touch keysthat have been designated for F-Code Based Communication orEncrypted Transmission.* If you want to designate a time for the operation to begin,press the DELAYED TX. key. The letter “T” will be displayed inthe first line of the message display. For more detailedinformation regarding communications that use the timer, refer to“Communication Using the Timer”, page 2-9.6. Press the Enter key.7. Press the Start key. The Reverse Polling operation will beginautomatically.* If a time for the operation to begin was designated,the Reverse Polling operation will begin when the appointed timeis reached.v :1358Document :A4Enter destinationv :Document :A4Enter destinationPolling communication:ê TX pollingRX pollingCont. polling RX
