Olivetti d-Copia 23 Operation Manual

Also see for d-Copia 23: Online manual

Contents

Olivetti d-Copia 23 Operation Manual Manual pdf 58 page image

2-9Section 2 Various Functions of this Fax* If you want to cancel the procedure part way through, press theReset key. The operation panel will return to the initial modesettings.1. Set the documents you want to transmit in the SRDF or on theplaten.* When the documents are set on the platen, it is necessary, aftereach page is scanned, to select whether or not you want totransmit more pages and to select the size of each page.(Refer to page 1-23.)2. Raise both cover plates and press the DELAYED TX. key.* The letter “T” will be displayed in the first line of the messagedisplay to indicate this is a communication that is using the timer.* If the maximum allowable number of communications that usethe timer (max: 50) is reached, an error message will appear inthe message display. In this case, press the Enter key and theoperation panel will return to the initial mode settings.Communication Using the TimerIf you designate in advance the time for a communication tobegin, that communication will be carried out automatically oncethe appointed time is reached. You can designate acommunication to be one that uses the timer during theoperation procedure for each of various types of faxcommunication available in this fax such as BroadcastTransmission.The example in the procedure below is for the transmission ofdocuments to a single destination using the timer function.* All transmissions that use the timer will be accomplished in theMemory Transmission mode even if the fax is currently in theDirect Feed Transmission mode.* Each communication that uses the timer can be set to begin atany minute between 00:00 - 23:59.* You can schedule up to 50 communications that use the timer(including Standby Transmissions and Interrupt Transmissions)at one time.* When 2 communications that use the timer are scheduled tobegin at the same time, fundamentally the communication thatwas registered first will be accomplished first. However, even ifit has been registered later, any communication scheduled witha single location will take priority over a communication tomultiple locations.* Dial Confirmation is not available for communications that usethe timer.* If you want to cancel or change the contents of acommunication that is waiting for a start time, refer to“Editing a Communication in Memory”, page 2-10.v :Document :A4TEnter destination3. Enter the destination fax number.* You can enter the fax number using the keypad, abbreviatednumbers, one-touch keys or the directory.4. Press the Enter key or the Start key.5. Use the keypad to enter the desired time for the transmission tobegin.* If you want to reset the displayed time to “00:00”, simply pressthe Stop/Clear key.6. Press the Enter key. The documents will be scanned into memory,and the transmission operation will begin when the appointed timeis reached.* If the Delayed Communication Report print out setting is turnedON, a Delayed Communication Report will be printed out.(Refer to page 6-2.)TX time:12:00Enter transmission timeTX time:20:00Enter transmission timev:1357901Page Doc. nr :056E F Document:A4Now scanning01-DEC-1999 12:00Set original01-DEC-1999 12:00Document :A4Enter destinationv :13579Document :A4TEnter destination