2.5.4.3 Account Code EntryDescriptionAn account code is used to identify outgoing trunk calls for accounting and billing purposes. The account codeis appended to the SMDR call record. If, for example, a firm uses an account code for each client, the firm candetermine what calls were made for the client, and can submit a bill to the client according to the client’s accountcode on the SMDR call record.There are two methods of entering account codes as follows:One of the methods is selected for each extension on a COS basis.Mode DescriptionOption A user can enter an account code if needed at any time desired.Forced A user must always enter an account code before seizing a trunk.Conditions• An account code can be stored into Memory Dialling (e.g., One-touch Dialling).• Account ButtonA flexible button can be customised as the Account button. The Account button is used in place of thefeature number for entering an account code. This button is useful because it can be used at any time,while feature number entry is allowed only when hearing a dial tone before seizing a trunk.• Extension users can enter an account code at any time during a call, including after the call has beendisconnected and a reorder tone is heard. However, if an account code is entered after there is no longera reorder tone, the call will not be stored in the SMDR record.• If more than one account code is entered, the code entered last is printed out on SMDR.• Even in Forced mode, emergency numbers can be dialled out without an account code.(® 2.5.4.2 Emergency Call)• PT users can also enter an account code for incoming trunk calls during a conversation.• Verification Code EntryTo identify who made a trunk call for accounting and billing purposes, a verification code is used. This codecan be used at any extension. (® 2.7.6 Verification Code Entry)PC Programming Manual References10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features— Account Code Entry10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—CO & SMDR— AccountCode ModePT Programming Manual References[508] Account Code ModeFeature Guide References2.21.2 Flexible Buttons2.22.1.1 Station Message Detail Recording (SMDR)5.1.1 Class of Service (COS)106 Feature Guide2.5.4 Trunk Call Features