Panasonic KX-NS500 Features Manual

Also see for KX-NS300: User manual Cabling configuration Basic Specification Programming manual Installation manual

Contents

Required Programming• PBXFor making a call:ARS programming (® 2.8.1 Automatic Route Selection (ARS)) or TIE line service programmingFor receiving a call:TIE line service programming[TIE Line Routing and Modification Table]LocationNo.LeadingNo.Priority 1 Priority 2 . .TRGDial ModificationTRGDial Modification . .RemovedNo. ofDigitsAddedNo.RemovedNo. ofDigitsAddedNo. . .01 22(VoIPport)0. .02 3 2 0 . .: : : : : : : : :[Explanation]Calls to destinations with leading number "2" or "3" are automatically routed through the VoIP ports,designated as trunk group 2.• IP GatewayIP address assignment for the local PBX and other PBXs.[Programming Example]DestinationLeading No. IP Address2 200.45.11.353 199.176.64.1: :[Explanation]Calls are routed to the IP address of each V-IPGW card based on the leading number dialled.Automatic Rerouting of VoIP Calls to Public TrunksWhen a VoIP call cannot be completed successfully, the PBX can automatically attempt to make the call usinga public trunk instead. This provides a backup method of making calls in cases when IP network transmissioncannot be completed successfully.Feature Guide 4294.3.2 Voice over Internet Protocol (VoIP) Network