2.6.4 Speed Dialling—Personal/SystemDescriptionAn extension user can make calls using abbreviated dialling for frequently dialled numbers which are storedin the PBX extension data, or the PBX system data.Personal Speed Dialling is also known as Station Speed Dialling.Depending on system programming, the System Speed Dial items displayed on a display PT can be limitedto items related to the extension’s tenant.Conditions[General]• Any number (e.g., telephone number, feature number) can be stored in a speed dialling number. A namecan be assigned to each Personal Speed Dialling number through personal programming, and SystemSpeed Dialling number.[Name Display on Trunk Calls]• When a trunk call is made using Personal/System Speed Dialling, if a name is registered to the Personal/System Speed Dialling entry, the name is displayed on the second line of a display PT’s LCD. The nameis not displayed on a phone with a one line LCD.• After a trunk call is made using Personal/System Speed Dialling, if Connected Name IdentificationPresentation (CONP) information is returned, the name registered in the CONP information takesprecedence over the Personal/System Speed Dialling name and is displayed on a display PT’s LCD.(® 4.3.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected NameIdentification Presentation (CNIP/CONP)—by QSIG)• If a recall feature or a transfer feature is used, the name registered to the Personal/System Speed Diallingentry will no longer be displayed on a display PT’s LCD.[Personal Speed Dialling]• Display LockAn extension user can lock the Personal Speed Dialling number display to prevent the numbers from beingviewed at any extension through personal programming (Display Lock). In this case, the Incoming/OutgoingCall Log displays are also locked, and the voice messages in the user’s mailbox cannot be played back.An extension personal identification number (PIN) is required to use this feature. (® 2.24.1 ExtensionPersonal Identification Number (PIN))[System Speed Dialling]• TRS/Barring Override by System Speed DiallingIt is possible to override the TRS/Barring using the System Speed Dialling. (® 2.7.1 Toll Restriction (TRS)/Call Barring (Barring))• System Speed Dialling Display by AUTO DIAL/STORE ButtonPressing the AUTO DIAL/STORE button on a display PT while on-hook can display the System SpeedDialling Directory.[Limiting the display by tenant—System Speed Dial]For System Speed Dial, an extension can reference the data for System or for each tenant the extension ismember of, depending on system programming. In "Tenant Exclusive" mode, System Speed Dial is displayedon display PTs as follows:• Only information about extensions that belong to the tenant as is displayed.• Changes to System Speed Dial settings only affect each tenant. They do not affect the whole system.124 Feature Guide2.6.4 Speed Dialling—Personal/System