2.1.1.7 Intercept Routing—No DestinationDescriptionProvides automatic redirection of incoming trunk calls that do not have a destination assigned. The interceptdestination is an operator (tenant/PBX).Conditions• Intercept Routing—No Destination on/offThe Intercept Routing—No Destination feature can be enabled or disabled through system programming.If disabled, a reorder tone will be sent to the caller. However, the Intercept Routing—No Destination featurealways functions for calls through the LCOT card even when disabled.• If an operator (tenant/PBX) is not assigned:The extension that is connected to the lowest-numbered port and is ready to receive calls will be theintercept destination.• Intercept Routing—No Destination also applies to calls from doorphones.PC Programming Manual References10.2 PBX Configuration—[2-2] System—Operator & BGM— PBX Operator—Day, Lunch, Break, Night18.5 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous— Intercept—Routing to Operator -No Destination (Destination is not programmed.)PT Programming Manual References[006] Operator AssignmentFeature Guide References5.1.5 Operator Features38 Feature Guide2.1.1 Incoming Trunk Call Features
