2.22.2 Printing MessageDescriptionAn extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammedin the Printing Message table, and are available to all extensions connected to the PBX. A message can containthe "%" symbol, which requires a number to be entered in its place when the message is selected at anextension.Depending on the content of the preprogrammed messages, this feature can be used to record a variety ofinformation, which can be output on SMDR to, for example, a connected PC.[Example]If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign inby selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connectedPC can then be used to generate employee work records.Conditions• Up to seven "%"s can be stored for each message.PC Programming Manual References10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features— Printing Message14.2 PBX Configuration—[6-2] Feature—Hotel & Charge—Main— SMDR for External Hotel Application2—Printing Message 1–8Feature Guide References2.22.1.1 Station Message Detail Recording (SMDR)6.1 Capacity of System ResourcesUser Manual References1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)270 Feature Guide2.22.2 Printing Message