2.24.3.3 Walking Extension-Home position controlDescriptionThe Walking Extension and Enhanced Walking Extension features include the Home position control featurewhich can be set through system programming.The Enable/Disable setting for Home position control applies to both the Walking Extension and EnhancedWalking Extension features.Disable: Location SwitchThe location of the extensions are switched.Enable: Return to the home locationWhen the location of the extensions are switched via Walking Extension or Enhanced Walking Extension, theyare returned to their original locations (home locations).When performing Walking Extension with this feature enabled, if you want to move your location permanently,you must return your extension to its home location before moving.When performing Enhanced Walking Extension with this feature enabled, the extension will return to its homelocation when the status is changed to Service-out mode.[Example]Service-out Service-inExtn. 101 Extn. 102 Extn. 102Location 1Service-out Extn. 101 Service-inExtn. 101 Service-in Extn. 101 Service-outExtn. 102 Extn. 101 Extn. 101Location 2Explanation:When an extension user enters Service-in mode at a location other than the home location, the location of theextensions are switched.This can be confusing for the user of the switched extension because the location of his/her extension may beunknown.288 Feature Guide2.24.3 Walking Extension Features
