Chapter 4 Settings — [ADVANCED MENU] menu104 - ENGLISH[ADVANCED MENU] menuOn the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 84) for the operation of the menu screen.[DIGITAL CINEMA REALITY]The picture quality is enhanced by raising the vertical resolution higher performing the cinema processing when576/50i signal for PAL (or SECAM), 480/60i signal for NTSC, and 1080/50i or 1080/60i signal is input.1) Press as to select [DIGITAL CINEMA REALITY].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically detects the input signal and performs cinema processing.[OFF] Does not perform cinema processing.[30p FIXED] When 480/60i or 1080/60isignal is input Performs forced cinema processing (2:2 pulldown).[25p FIXED] When 576/50i or 1080/50isignal is inputNotef In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30pFIXED]. (Vertical resolution will degrade.)f [DIGITAL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST].[BLANKING]Adjust the blanking width when there is a noise at the edge of the screen or the image is slightly running out fromthe screen while an image from the VCR, etc., is projected.1) Press as to select [BLANKING].2) Press the button.f The [BLANKING] adjustment screen is displayed.3) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].f When [CUSTOM MASKING] is set to anything other than [OFF] ([PC‑1], [PC‑2], or [PC‑3]), the blankingwidth can be adjusted to any shape using the computer. Up to three blanking settings adjusted using thecomputer can be saved.To use the [CUSTOM MASKING] function, the optional Upgrade Kit (Model No.: ET‑UK20) is required. Topurchase the product, consult your dealer.4) Press qw to adjust the blanking width.Blanking correction Item Operation Adjustment Range of adjustmentTop of the screen [UPPER]Press q. The blanking zonemoves upward.PT-RZ21K: Top and bottom0 - 1 198PT-RS20K: Top and bottom0 - 1 048Press w. The blanking zonemoves downward.Bottom of thescreen [LOWER]Press w. The blanking zonemoves upward.Press q. The blanking zonemoves downward.
