Chapter 4 Settings — [PROJECTOR SETUP] menu152 - ENGLISHOperation Adjustment Range of adjustmentPress w. Increases the maximum level of brightness correction. 8.0 % ‑ 100.0 %Press q. Decreases the maximum level of brightness correction.5) Press as to select [APPLY].6) Press the button.f The confirmation screen is displayed.7) Press qw to select [OK], and press the button.Notef When [OPERATING MODE] is set to [NORMAL] or [ECO], the item of [MAX LIGHT OUTPUT LEVEL] cannot be adjusted.f The brightness is corrected using this setting when the [PROJECTOR SETUP] menu → [BRIGHTNESS CONTROL] → [BRIGHTNESSCONTROL SETUP] → [CONSTANT MODE] is set to [AUTO] or [PC].f The [MAX LIGHT OUTPUT LEVEL] setting does not return to factory default setting even if the [PROJECTOR SETUP] menu →[INITIALIZE] → [ALL USER DATA] is executed.Setting [LIGHT OUTPUT]Adjust the brightness of light source.The [LIGHT OUTPUT] setting is synchronized with the [PROJECTOR SETUP] menu → [LIGHT OUTPUT]. Themost recent setting is reflected in both items.1) Press as to select [OPERATION SETTING].2) Press the button.f The [OPERATION SETTING] screen is displayed.3) Press as to select [LIGHT OUTPUT].4) Press qw to adjust.Operation Adjustment Range of adjustmentBrightness RuntimePress w. The screen becomes brighter. The runtime becomes shorter. 8.0 % ‑ 100.0 %Press q. The screen becomes darker. The runtime becomes longer.5) Press as to select [APPLY].6) Press the button.f The confirmation screen is displayed.7) Press qw to select [OK], and press the button.Notef [LIGHT OUTPUT] can be adjusted individually for each setting item of [OPERATING MODE].f In such a case when configuring multiple screens with multiple projectors, uniformity of brightness between multiple screens can beobtained by adjusting [LIGHT OUTPUT].
