Chapter 4 Settings — [DISPLAY OPTION] menu134 - ENGLISH2) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [STARTUP].4) Press qw to switch the item.[OPEN] The projector goes into projection mode with the shutter function disabled (shutter: opened) when thepower is turned on.[CLOSE] The projector goes into projection mode with the shutter function enabled (shutter: closed) when thepower is turned on.Setting [SHUT-OFF]Automatically open/close the mechanical shutter when the power is turned off.1) Press as to select [SHUTTER SETTING].2) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [SHUT-OFF].4) Press qw to switch the item.[LAST USED] The projector goes into standby mode with the condition of the mechanical shutter maintained whenthe projector is switched off.[OPEN] The projector goes into standby mode with the mechanical shutter opened when the projector isswitched off.[CLOSE] The projector goes into standby mode with the mechanical shutter closed when the projector isswitched off.Setting the shutter synchronization functionThe shutter synchronization function is a function to synchronize the shutter operation of the specified projectorto other projectors, and the effect using the shutter function including the fade in/fade out operation can besynchronized.To use the shutter synchronization function, it is necessary to connect the projectors targeted for synchronizationin a loop with daisy chain connection using the terminal and the PROJECTOR SYNC OUT> terminal. For details of how to connect the projectors, refer to “Connecting examplewhen using the contrast synchronization function/shutter synchronization function” (x page 56).1) Press as to select [SHUTTER SETTING].2) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [MULTI PROJECTOR SYNC].4) Press the button.f The [MULTI PROJECTOR SYNC] screen is displayed.5) Press as to select [MODE].6) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Select this item when the contrast synchronization function and the shutter synchronization functionare not used.[MASTER]Select this item when the contrast synchronization function or the shutter synchronization function isused.Set this item only on one of the linked projectors that becomes the synchronization source of theshutter operation.[SLAVE]Select this item when the contrast synchronization function or the shutter synchronization function isused.Set this item in all the linked projectors excluding the projector set as the [MASTER].
