Chapter 1 Preparation — Precautions for use26 - ENGLISHLens hood mounting plate 2 <1>(DPMH1089ZA)Lens hood screw <6>(XYN4+F8FJK)Knurled head screw <6>(DPHD1026ZA)Attentionf After unpacking the projector, discard the power cord cap and packaging material properly.f Do not use the supplied power cord for devices other than this projector.f For missing accessories, consult your dealer.f Store small parts in an appropriate manner, and keep them away from small children.Notef The lens hood needs to be mounted to the projector when using the projector in combination with the projection lensesbelow in the North American region. Always ask a qualified technician or your dealer to attach these projection lenses or tomount the lens hood.Projection lens: ET-D75LE8, ET-D75LE30, ET-D75LE40The lens hood is assembled and mounted to the projector using the following supplied components.Lens hood 1, Lens hood 2, Lens hood mounting plate 1, Lens hood mounting plate 2, Lens hood screws, Knurled headscrewsFor the assembly and attachment, refer to the separate document “Mounting the lens hood”. The components and documentof the lens hood may not be supplied depending on the country or region where you purchased the product.f The type and number of the supplied power cords vary depending on the country or region where you purchased theproduct.f The model numbers of accessories are subject to change without prior notice.
