Chapter 4 Settings — [TEST PATTERN] menuENGLISH - 173[TEST PATTERN] menuOn the menu screen, select [TEST PATTERN] from the main menu.Refer to “Navigating through the menu” (x page 84) for the operation of the menu screen.[TEST PATTERN]Display the test pattern built-in to the projector.Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the inputsignal before performing various adjustments.1) Press qw to switch the [TEST PATTERN] item.f The items will switch each time you press the button.Menu screen + All whiteDisplays a test pattern with the menu screen. Select a desired test pattern.Menu screen + All blackMenu screen + WindowMenu screen + Window(inversion)Menu screen + Color bar(vertical)Menu screen + Color bar(horizontal)Menu screen + 16:9/4:3aspect frameMenu screen + Cross hatchMenu screen + FocusMenu screen + Input screen Displays the menu screen and input signal.Built-in test patterns are not displayed.Notef Press the button on the remote control while the test pattern is displayed to hide the menu screen.f It is recommended to perform the focus adjustment after 30 minutes have elapsed with the focus test pattern displayed. To use the activefocus optimizer function, set the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE FOCUS] to [ON],and then adjust the focus. (x page 144)Changing the color of the cross hatch test patternThe color can be changed when the “Menu screen + Cross hatch” test pattern is displayed.1) Press qw to select the “Menu screen + Cross hatch” test pattern.2) Press the button.f The [TEST PATTERN COLOR] screen is displayed.3) Press as to select a color, and press the button.f The color of the cross hatch test pattern is changed to the selected color.Notef The test pattern color settings return to [WHITE] when the projector is switched off.f Colors of the test patterns other than cross hatch test patterns cannot be changed.
