Chapter 5 Operations — Web control functionENGLISH - 193[Projector status] pageClick [Status] → [Projector status].Display the status of the projector for the following items.1417187108912341920215611121316151 [PROJECTOR TYPE]Displays the type of the projector.2 [MAIN VERSION]Displays the firmware version of the projector.3 [POWER]Displays the status of the power.4 [SHUTTER]Displays the status of the shutter. ([CLOSE]: Shutter functionenabled; [OPEN]: Shutter function disabled)5 [OPERATING MODE]Displays the setting status of [OPERATING MODE].6 [MAX LIGHT OUTPUT LEVEL]Displays the setting status of [MAX LIGHT OUTPUT LEVEL].7 [SERIAL NUMBER]Displays the serial number of the projector.8 [REMOTE2 STATUS]Displays the control status of the terminal.9 [OSD]Displays the status of on‑screen display function. ([ON]:Display; [OFF]: Hide)10 [AC VOLTAGE]Displays the input supply voltage.11 [LIGHT OUTPUT]Displays the setting status of [LIGHT OUTPUT].12 [INPUT]Displays the status of the selected input.13 [INTAKE AIR TEMPERATURE]Displays the status of the intake air temperature of the projector.14 [OPTICS MODULE TEMPERATURE]Displays the status of the internal temperature of the projector.15 [EXHAUST AIR TEMPERATURE]Displays the status of the exhaust air temperature of theprojector.16 [LIGHT1 TEMPERATURE]Displays the temperature status of light source 1.17 [LIGHT2 TEMPERATURE]Displays the temperature status of light source 2.18 [LIGHT1]Displays the lighting status and runtime of light source 1.19 [LIGHT2]Displays the lighting status and runtime of light source 2.20 [SELF TEST]Displays the self-diagnosis information.21 [PROJECTOR RUNTIME]Displays the runtime of the projector.
