Chapter 4 Settings — [PROJECTOR SETUP] menu146 - ENGLISHf It will return to previous screen by selecting [BACK] and pressing the button.18) Wait until [Waiting time] turns [0s].f Wait until the focus is stabilized.f When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomesselectable.19) Press qw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 5/8) is displayed.f It will return to previous screen by selecting [BACK] and pressing the button.20) Press asqw to select [FOCUS POSITION].21) Press the qw button to adjust the focus.22) Press asqw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 6/8) is displayed.23) Press asqw to select [TEST PATTERN].24) Press qw to select [INTERNAL].f The items will switch each time you press the button.[INTERNAL] Uses the internal focus test pattern of signal level approximately 0 % for focus adjustment.[EXTERNAL] Select this item when using the input image from an external device for focus adjustment.25) Press asqw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 7/8) is displayed.f It will return to previous screen by selecting [BACK] and pressing the button.26) Wait until [Waiting time] turns [0s].f Wait until the focus is stabilized.f When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomesselectable.27) Press qw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 8/8) is displayed.f It will return to previous screen by selecting [BACK] and pressing the button.28) Press asqw to select [FOCUS POSITION].29) Press the qw button to adjust the focus.30) Press asqw to select [STORE], and press the button.f [SETUP ASSISTANT] is completed, and the parameters for [FOCUS OFFSET BRIGHT] and [FOCUSOFFSET DARK] are updated.Notef When the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set by executing [SETUP ASSISTANT], the[PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE FOCUS] will be set to [ON].f When [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set following the guidance of [SETUP ASSISTANT] with AC 100 Vto AC 120 V, use the projector with AC 100 V to AC 120 V. When the power supply is changed to AC 200 V to AC 240 V, reset the settingsusing [SETUP ASSISTANT].Performing simplified setting using the external input imageInput any focus adjustment still image from the external device connected to the projector, and set the parametersfor [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] following the guidance of [SETUP ASSISTANT].1) Switch to the input to display the focus adjustment image.2) Press as to select [LENS].3) Press the button.f The [LENS] screen is displayed.
