Panasonic PT-RZ21K Operating Instructions Manual

Also see for PT-RS20K: Command list Operating instructions Operating instructions

Contents

Chapter 4 Settings — [PROJECTOR SETUP] menu154 - ENGLISHNotef [LIGHT OUTPUT] can be adjusted individually for each setting item of [OPERATING MODE].f In such a case when configuring multiple screens with multiple projectors, uniformity of brightness between multiple screens can beobtained by adjusting [LIGHT OUTPUT].[BRIGHTNESS CONTROL]The projector is equipped with a brightness sensor to measure brightness and color of the light source, andcorrects brightness and white balance of the projected image according to the changes in brightness and color ofthe light source.By using this function, in such a condition that multiple screens are configured using projected images of multipleprojectors, you can reduce changes in overall brightness and white balance of the multiple screens due to agingof the light source and suppress variation in brightness and white balance to preserve uniformity.Setting [BRIGHTNESS CONTROL SETUP]Set the operation of the brightness control function.1) Press as to select [BRIGHTNESS CONTROL].2) Press the button.f The [BRIGHTNESS CONTROL] screen is displayed.3) Press as to select [BRIGHTNESS CONTROL SETUP].4) Press the button.f The [BRIGHTNESS CONTROL SETUP] screen is displayed.5) Press as to select [CONSTANT MODE].6) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Does not correct the brightness of the screen by the brightness sensor.[AUTO]Corrects the brightness of the screen by the brightness sensor.When the brightness of light source or white balance changes, the brightness of the projected imageis automatically corrected.[PC] Synchronizes nine or more projectors using a computer and the dedicated software “Multi Monitoring& Control Software”*1 .*1 “Multi Monitoring & Control Software” can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).f When [PC] is selected, proceed to Step 9).7) Press as to select [LINK].8) Press qw to switch the item.f The items will switch each time you press the button.[OFF]Performs corrections by the brightness sensor on a single projector without synchronizing with theother projectors.The duration that the constant brightness is kept will become longer by setting the value of [LIGHTOUTPUT] smaller.[GROUP A][GROUP B][GROUP C][GROUP D]Performs correction by the brightness sensor in multiple projectors in synchronization.Up to four groups (A to D) can be set within the same subnet by using the network function.You can register and synchronize up to eight projectors in one group.9) Press as to select [APPLY].10) Press the button.f When [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP] is set to anything other than [OFF], thebrightness and white balance of light source at the time when the button is pressed is recordedas the standard brightness and white balance.