Chapter 4 Settings — [PROJECTOR SETUP] menu148 - ENGLISH20) Press qw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 5/8) is displayed.f It will return to previous screen by selecting [BACK] and pressing the button.21) Press asqw to select [FOCUS POSITION].22) Press the qw button to adjust the focus.23) Press asqw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 6/8) is displayed.24) Press asqw to select [TEST PATTERN].25) Press qw to select [EXTERNAL].f The items will switch each time you press the button.[INTERNAL] Select this item when using the internal test pattern for focus adjustment.[EXTERNAL]Uses the input image from the external device for focus adjustment. If the level of [Brightness ofthe image] exceeds the specified value, [NEXT] cannot be selected. When the dark image with abrightness level indicated in the menu screen (OSD) or lower is input, [NEXT] can be selected.26) Press asqw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 7/8) is displayed.f It will return to previous screen by selecting [BACK] and pressing the button.27) Wait until [Waiting time] turns [0s].f Wait until the focus is stabilized.f When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomesselectable.28) Press qw to select [NEXT], and press the button.f The [SETUP ASSISTANT] screen (page 8/8) is displayed.f It will return to previous screen by selecting [BACK] and pressing the button.29) Press asqw to select [FOCUS POSITION].30) Press the qw button to adjust the focus.31) Press asqw to select [STORE], and press the button.f [SETUP ASSISTANT] is completed, and the parameters for [FOCUS OFFSET BRIGHT] and [FOCUSOFFSET DARK] are updated.Notef When the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set by executing [SETUP ASSISTANT], the[PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE FOCUS] will be set to [ON].f When [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set following the guidance of [SETUP ASSISTANT] with AC 100 Vto AC 120 V, use the projector with AC 100 V to AC 120 V. When the power supply is changed to AC 200 V to AC 240 V, reset the settingsusing [SETUP ASSISTANT].Directly setting the parameterWhen using the projection lens where the optimal parameter at the time when combined with the projector isalready known, [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] parameters can be individually setwithout executing [SETUP ASSISTANT].1) Press as to select [LENS].2) Press the button.f The [LENS] screen is displayed.3) Press as to select [ACTIVE FOCUS OPTIMIZER].4) Press the button.f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.5) Press as to select [FOCUS OFFSET SETUP].
