Chapter 4 Settings — [DISPLAY OPTION] menu128 - ENGLISHSetting [SYSTEM SELECTOR] in [SDI IN]1) Press as to select [SDI IN].2) Press the button.f The [SDI IN] screen is displayed.3) Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the button.f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.f When [DUAL LINK SETTING] is selected, proceed to Step 5).4) Press as to select [SDI1] or [SDI2], and press the button.f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.5) Press as to select [SYSTEM SELECTOR].6) Press qw to switch the item.f The items will switch each time you press the button.[AUTO]Automatically selects [RGB], [YPBPR 4:4:4], [YPBPR 4:2:2], or [XYZ].[RGB], [YPBPR 4:4:4], [YPB PR 4:2:2], or [XYZ] is automatically selected by reading the payload IDattached to the input signal. [RGB] is selected when the payload ID is not attached to the input signal.[RGB] Fixes to [RGB].[YPB PR 4:4:4] Fixes to [YPBPR 4:4:4].[YP B PR 4:2:2] Fixes to [YPBPR 4:2:2].[XYZ] Fixes to [XYZ].Setting [BIT DEPTH] in [SDI IN]1) Press as to select [SDI IN].2) Press the button.f The [SDI IN] screen is displayed.3) Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the button.f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.f When [DUAL LINK SETTING] is selected, proceed to Step 5).4) Press as to select [SDI1] or [SDI2], and press the button.f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.5) Press as to select [BIT DEPTH].6) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically select [12-bit] or [10-bit].[12-bit] Fixes to [12-bit].[10-bit] Fixes to [10-bit].Setting [SIGNAL LEVEL] in [SDI IN]1) Press as to select [SDI IN].2) Press the button.f The [SDI IN] screen is displayed.3) Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the button.f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.f When [DUAL LINK SETTING] is selected, proceed to Step 5).
