Chapter 4 Settings — [DISPLAY OPTION] menu124 - ENGLISH9) Press qw to select [VERTICAL SCAN FREQUENCY].f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].g [1920x1080p], [1920x1080i]10) Press the button.f The confirmation screen is displayed.11) Press qw to select [OK], and press the button.Notef The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].f The resolution and vertical scanning frequency settings may also be required on your computer or video device.f After configuring settings, your computer or video device or the projector may be required to be turned off and on.f A signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or videodevice.[HDMI IN]Set this item in accordance with the video signal input to the terminal.Setting [SIGNAL LEVEL] in [HDMI IN]1) Press as to select [HDMI IN].2) Press the button.f The [HDMI IN] screen is displayed.3) Press as to select [SIGNAL LEVEL].4) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[64-940] Select this item when the signal output from the HDMI terminal of an external device (such as a Blu‑ray disc player) is input to the terminal.[0-1023]Select this item when the signal output from the DVI‑D terminal of an external device (such as acomputer) is input to the terminal via a conversion cable or similar cable.Select this item also when the signal output from the HDMI terminal of a computer or other device isinput to the terminal.Notef The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of theexternal device regarding the output of the external device.f The HDMI signal level is displayed for 30 bits of input.Setting [EDID MODE] in [HDMI IN]1) Press as to select [HDMI IN].2) Press the button.f The [HDMI IN] screen is displayed.3) Press as to select [EDID MODE].4) Press the button.f The [HDMI EDID MODE] screen is displayed.5) Press qw to switch [EDID MODE].f The items will switch each time you press the button.[DEFAULT] Standard setting.[SCREEN FIT] Changes EDID data according to the [SCREEN FORMAT] setting.[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
