1 [DHCP ON]/[DHCP OFF]To enable the DHCP client function, set to [DHCP ON].2 [IP ADDRESS]Enter the IP address when not using a DHCP server.3 [SUBNET MASK]Enter the subnet mask when not using a DHCP server.4 [DEFAULT GATEWAY]Enter the default gateway address when not using aDHCP server.5 [DNS1]/[DNS2]Enter the DNS1/DNS2 server address.Permissible/ available characters for the entry of DNS1/DNS2 server address.(primary):Numbers (0 - 9), period (.)(Example: 192.168.0.253).6 [Back]/[Next]Click the [Back] button to return to the original screen.The current settings are displayed by pressing the [Next]button.Click the [Submit] button to update the settings.Notef When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. Inthat case, click [Network config] again since the following operation will not be guaranteed.f Changing LAN settings while connected to the LAN may cause the connection to cut out.Wireless LAN (M-DIRECT)1234561 [IP ADDRESS]Enter the IP address.2 [SUBNET MASK]Enter the subnet mask.3 [SSID]Set the SSID to be used in M-DIRECT.4 [CHANNEL]Set the channel to be used in M-DIRECT.5 [KEY]Set the key to be used in M-DIRECT.Input either 8 to 63 alphanumerics or a 64 digit string in thehexadecimal format.6 [Back]/[Next]Click the [Back] button to return to the original screen.The current settings are displayed by pressing the [Next]button.Click the [Submit] button to update the settings.Wireless LAN (USER 1~USER 3)1234567891077ENGLISH - 105Chapter 4 Settings - [NETWORK/USB] menuChapter 4 Settings - [NETWORK/USB] menu
