[CORNER CORRECTION]1) Press as to select [KEYSTONE].2) Press the button.f The [KEYSTONE] screen is displayed.3) Press as to select [CORNER CORRECTION].4) Press the button.f The [CORNER CORRECTION] screen is displayed.5) Press as to select the item to adjust, then press the button.f The [CORNER CORRECTION] individual adjustment screen is displayed.6) Press asqw to adjust.[CORNER CORRECTION][UPPER LEFT] [UPPER RIGHT] [LOWER LEFT] [LOWER RIGHT]Notef Either [KEYSTONE] or [CORNER CORRECTION] setting value is valid. When [KEYSTONE] or [CORNER CORRECTION]adjustment is finished, you adjust the other one, the adjusted value will be reset.f Press the button on the remote control when the [KEYSTONE] or [CORNER CORRECTION] screen isdisplaying, it will switch to the other adjustment screen.f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the nextcorner can also be displayed by pressing the button.f Correcting up to ±40° for the tilt in the vertical direction and ±30° for the tilt in the horizontal are available for adjustmentswith [KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install theprojector so that the correction will be as small as possible.f Screen size will also change when [KEYSTONE] is used to perform various adjustments.f Aspect ratio of the image size may shift depending on the correction.[SHIFT](Only for computer signal input)Move the image position vertically or horizontally if the image position projected on the screen is shifted even when the relativeposition of the projector and the screen is installed correctly.1) Press as to select [SHIFT].2) Press the button.f The [SHIFT] screen is displayed.3) Press asqw to adjust the position.Orientation Operation AdjustmentVertical (up and down)adjustment.Press the a button. The image position moves up.Press the s button. The image position moves down.66 - ENGLISHChapter 4 Settings - [POSITION] menu
