[DAYLIGHT VIEW]You can correct the image to the optimal vividness even if it is projected under a bright light.1) Press as to select [DAYLIGHT VIEW].2) Press qw or the button.f The [DAYLIGHT VIEW] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Enables auto correction of [DAYLIGHT VIEW]. The brightness of the room is detected by theluminance sensor, and the vividness of the image is automatically corrected.[ON] Enables [DAYLIGHT VIEW].[OFF] Disables [DAYLIGHT VIEW].Notef [DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to[REAR/DESK] or [REAR/CEILING].f The [AUTO] mode may not function properly if an object is placed on the top of the projector.[DIGITAL CINEMA REALITY](Only for movie-based signal input)You can improve the vertical resolution of 2-2 and 2-3 pull down video.This function is available only with the following signal inputs.525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, S-VIDEO signal, VIDEO signal.1) Press as to select [DIGITAL CINEMA REALITY].2) Press qw or the button.f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables [DIGITAL CINEMA REALITY].[ON] Enables [DIGITAL CINEMA REALITY].[NOISE REDUCTION](Only when the /You can reduce noises when the input image is degraded and noise is occurring in the image signal.1) Press as to select [NOISE REDUCTION].2) Press qw or the button.f The [NOISE REDUCTION] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables [NOISE REDUCTION].[ON] Enables [NOISE REDUCTION].Attentionf When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case,set it to [OFF].ENGLISH - 63Chapter 4 Settings - [PICTURE] menu
