1 [Auth]Select the authentication method specified by yourInternet service provider.2 [SMTP Auth]Set when the SMTP authentication is selected.3 [POP server name]Enter the POP server name.Allowed characters:Alphanumerics (A - Z, a - z, 0 - 9)Minus sign (-) and period (.)4 [User name]Enter the user name for the POP server or the SMTPserver.5 [Password]Enter the password for the POP server or the SMTPserver.6 [SMTP server port]Enter the port number of the SMTP server.(Normally 25)7 [POP server port]Enter the port number of the POP server.(Normally 110)8 [Submit]Update the settings.Contents of mail sentExample of E-mail sent when E-mail is setMail with the contents shown below is sent when the e-mail settings have been established.=== Panasonic projector report(CONFIGURE) ===Projector Type : PT-VW355NSerial No : 000000000----- E-mail setup data -----TEMPERATURE WARNING SETUPMINIMUM TIME at [ 60] minutes intervalINTAKE AIR TEMPERATURE Over [ 32degC / 89degF ]ERROR [ OFF ]LAMP RUNTIME [ OFF ] at REMAIN [ 400] HLAMP RUNTIME [ OFF ] at REMAIN [ 200] HINTAKE AIR TEMPERATURE [ OFF ]----- check system -----FAN [ OK ]INTAKE AIR TEMPERATURE [ OK ]EXHAUST AIR TEMPERATURE [ OK ]OPTICS MODULE TEMPERATURE [ OK ]LAMP REMAIN TIME [ OK ]LAMP STATUS [ OK ]APERTURE (CONTRAST-SHUTTER) [ OK ]AIR FILTER [ OK ](Error code 00 00 00 00 00 00 00 00)Intake air temperature : 31 degC / 87 degFExhaust air temperature : 37 degC / 98 degFOptics module temperature : 39 degC / 102 degFPROJECTOR RUNTIME 800 HLAMP NORMAL 500 HLAMP ECO 700 HLAMP REMAIN 4000 H-------- Current status ---------MAIN VERSION 1.00NETWORK VERSION 1.00SUB VERSION 1.00LAMP STATUS LAMP=ONINPUT RGBSIGNAL NAME XGA6SIGNAL FREQUENCY 0.00kHz / 0.00Hz----- Wired Network configuration -----DHCP Client OFFIP address 192.168.10.100MAC address 04:20:9A:00:00:00----- Wireless Network configuration -----DHCP Client OFFIP address 192.168.0.100MAC address 04:20:9A:00:00:00----- Memo -----108 - ENGLISHChapter 4 Settings - [NETWORK/USB] menuChapter 4 Settings - [NETWORK/USB] menu
