|
f The items will switch each time you press the button.[SXGA] Normal setting.[SXGA +] Set this when the edge of the image is cropped.[P-TIMER]Set and operate the presentation timer function.1) Press as to select [P-TIMER].2) Press the button.f The [P-TIMER] screen is displayed.[MODE] Switches the elapsed time between [COUNT UP] and [COUNT DOWN].[TIMER] Sets the finish time of timer when [COUNT DOWN] is selected.[START] / [STOP] /[RESTART] Operates the timer.[RESET] Resets the count.[EXIT] [P-TIMER] is finished.Setting [MODE]1) Press as to select [MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[COUNT UP] Displays the elapsed time since the count was started.[COUNT DOWN] Displays the remaining time of the time set by [TIMER].Setting the countdown timer1) Press as to select [TIMER].2) Press qw to set the timer.f The time can be set in 1-minute increments from 1 to 180 minutes.f The factory default value is 10 minutes.Notef [TIMER] is available only when [MODE] is set to [COUNT DOWN].The operation of [P-TIMER]1) Press as to select one item.[START] The count is started.[STOP] The count is stopped.[RESTART] The count is resumed.[RESET] The count is reset.2) Press the button.f When you select [START] or [RESTART], the remaining time or the elapsed time will be displayed in the lower right ofthe projected image.f When you select [STOP], the remaining time or the elapsed time while stopping the counting will be displayed in thelower right of the projected image.Notef You can also use the P-TIMER function by pressing the button on the remote control (x page 54).f If the elapsed time or remaining time is displaying, the text will not be displayed even when the [SECURITY] menu → [TEXTDISPLAY] (x page 86) is set to [ON].f The elapsed time or remaining time will not be displayed when the menu screen is displaying.f The start time will be "000:00" when [MODE] is set to [COUNT UP].f When [MODE] is set to [COUNT DOWN], the start time becomes the value set at [TIMER].f The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.Ending the presentation timer1) Press as to select [P-TIMER].74 - ENGLISHChapter 4 Settings - [DISPLAY OPTION] menu PreviousNext |