About your projectorRemote control This jack is not used for theseprojector models.12356789410111213141516171819202122232425272826291 Remote control signal emitters2 Power on <b> buttonTurn the projector on.3 buttonAutomatically adjusts the image display position whileprojecting the image. In addition, it acts as button when using the MEMORY VIEWER function.(x page 49)4 Open or close the On-Screen Menu. (x page 56)5 button/asq(VOL -) w(VOL+) buttonsNavigate the menu display.Adjust the volume.6 buttonResets the content of the sub-menu to the factorydefault. (x page 57)Or deletes one character when you enter an IP addressor a text.7 buttonSwitches the COMPUTER2 signal to project.8 buttonSwitches the COMPUTER1 signal to project.9 buttonSwitches the MIRRORING signal to project.(x page 51)10 buttonSwitches the MEMORY VIEWER signal to project.(x page 50)11 buttonUsed to simultaneously control all the projectors with oneremote control for a system using multiple projectors.(x page 29)12 buttonSets the ID number of the remote control to use for asystem using multiple projectors. (x page 29)13 buttonsZoom in and out the images. (x page 52)14 buttonsYou can page up or page down files such as PowerPointthrough "Wireless Manager ME6.3". (x page 51)15 buttonUsed to mute the audio. (x page 54)16 button (Only for PT-VW355N)
Operate the P IN P function. (x page 53)17 switchWhen using the remote control, set this switch to “ON”.Set it to “OFF” to avoid misoperation when it is not in use.18 Power standby <v> buttonTurn the projector off.19 Remote control indicatorFlashes if any button in the remote control is pressed.20 buttonCorrect keystone distortion. (x page 49)21 buttonReturn to the previous menu or cancel the setting.22 buttonAssigns a frequently used operation as a shortcut button.23 buttonSwitches the HDMI signal to project.24 buttonSwitches the Panasonic APPLICATION signal to project.25 Switches the VIDEO signal or S-VIDEO signal to project.26 buttonPauses the projected image and mute the audiotemporarily. (x page 53)27 Number buttonsAct as number buttons. Use these buttons when settingthe remote control codes or entering the password.28 buttonOperate the P-TIMER function. (x page 54)29 buttonUsed to turn off the audio and video temporarily.(x page 53)ENGLISH - 25Chapter 1 Preparation - About your projector