[PASSWORD CHANGE]1) Press as to select [PASSWORD CHANGE].2) Press the button.f The [PASSWORD CHANGE] screen is displayed.3) Press asqw to set the password.4) Press as to select [OK], and press the button.Notef You can enter 8 characters at most.f Change the password periodically that is hard to guess.[NETWORK CONTROL]Set when you want to control the projector from a computer connected to the network.1) Press as to select [NETWORK CONTROL].2) Press qw to switch the item.f The items will switch each time you press the button.[ON] This function is enabled. Web control, PJLink control, the command control of the LAN areenabled.[OFF] This function is disabled.[AMX D.D.]Set to [ON] to control with the controller of AMX Corporation.Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMXCorporation.URL http://www.amx.com/1) Press as to select [AMX D.D.].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] This function is disabled.[ON] This function is enabled.[Crestron Connected(TM)]Set to [ON] to control with Crestron Connected™ of Crestron Electronics, Inc.1) Press as to select [Crestron Connected(TM)].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] This function is disabled.[ON] This function is enabled.[LIVE MODE CUT IN]Set this [ON] to allow interrupt of the Live mode by other users, or to allow delivery of images by the “Multi Projector Monitoring& Control Software”, while the Live mode is active (sending image) by the “Wireless Manager ME6.3”.1) Press as to select [LIVE MODE CUT IN].2) Press qw to switch the item.f The items will switch each time you press the button.[ON] This function is enabled.[OFF] This function is disabled.ENGLISH - 93Chapter 4 Settings - [NETWORK/USB] menu
