Notef Pressing the f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannotbe adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAMELOCK] may not be displayed depending on the input signal.f Some items can be adjusted even if signals are not input.f Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.f For menu items, refer to “Main menu” (x page 57) and “Sub-menu” (x page 58).Resetting adjustment values to the factory defaultIf the button on the remote control is pressed, the values adjusted in the menu items are restored to the factorydefault settings.button1) Press the button on the remote control.Notef You cannot reset all the settings to the factory default at a time.f To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute the [PROJECTORSETUP] menu → [INITIALIZE ALL] (x page 84).f Some items cannot be reset by pressing the button. Adjust each item manually.Main menuThe main menu consists of the following 7 menu items.When a main menu item is selected, the screen changes to a sub-menu selection screen.Main-menu item Page[PICTURE] 60[POSITION] 65[LANGUAGE] 69[DISPLAY OPTION] 70[PROJECTOR SETUP] 77[SECURITY] 85[NETWORK/USB] 88ENGLISH - 57Chapter 4 Settings - Menu Navigation