[TEXT DISPLAY]Overlap the security message (text) over the projecting image.1) Press as to select [TEXT DISPLAY].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the text display.[ON] Enables the text display.[TEXT CHANGE]Change the text displayed when the text display is enabled by selecting [ON] in [TEXT DISPLAY].1) Press as to select [TEXT CHANGE].2) Press the button.f The [TEXT CHANGE] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.4) Press asqw to select [OK], and press the button.f The text is changed.[MENU LOCK]Display the menu by the 1) Press as to select [MENU LOCK].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Unlocks menu operations.[ON] Locks menu operations.Notef When the entered password is incorrect after setting [MENU LOCK] to [ON], the f [MENU LOCK] is set to [OFF] at the time of purchase or when [INITIALIZE ALL] is executed.f When [MENU LOCK] is set to [ON] and then enter the password to release the lock, the unlock state is held until theprojector enters the standby mode.[MENU LOCK PASSWORD]Change the menu lock password.1) Press as to select [MENU LOCK PASSWORD].2) Press the button.f The [MENU LOCK PASSWORD] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.f Up to 16 characters can be input.4) Press asqw to select [OK], and press the button.f To cancel, select [CANCEL].Attentionf The initial password is “AAAA” at the time of purchase or when [INITIALIZE ALL] is executed.f Change the password periodically that is hard to guess.86 - ENGLISHChapter 4 Settings - [SECURITY] menu