1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.[FILTERCOUNTER] Displays the using time of the filter.[TIMER] Sets the timer when you want to display an alert message of filter replacement.[FILTER COUNTERRESET] Resets the filter counter.Setting [TIMER]1) Press as to select [TIMER].2) Press qw to switch the setting of the timer.f The items will switch each time you press the button.[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H] → [7000 H][FILTER COUNTER RESET]1) Press as to select [FILTER COUNTER RESET].2) Press the button.f The [FILTER COUNTER RESET] screen is displayed.3) Press qw to select [OK] and then press the button.[INITIALIZE ALL]Return various setting values to their factory default settings.1) Press as to select [INITIALIZE ALL].2) Press the button.f The [INITIALIZE ALL] screen is displayed.3) When the confirmation is displayed, press qw to select [OK] and then press the button.f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF.] screen will be displayed.4) Press the button.f The operation of other buttons is disabled.f The initial setting (display language) screen will be displayed when turning on the projector next time.Notef The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.f When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of[NETWORK/USB] cannot be returned to the factory default values. For details about the initialization of [NETWORK/USB],please refer to [NETWORK/USB] → [INITIALIZE] (x page 96).84 - ENGLISHChapter 4 Settings - [PROJECTOR SETUP] menu