Panasonic PT-VW355N Operating Instructions Manual

Also see for PT-VW355N: Operating instructions

Contents

[WIRELESS LAN]Set the connections of wireless LAN.1) Press as to select [WIRELESS LAN].2) Press qw to select the connection method.[DISABLE] When do not use the wireless LAN function.[SIMPLE]Direct connection mode that can be compatible with all OS (Windows / Mac / iOS /Android etc.).Use the wireless LAN function via the application software which supports"Wireless Manager ME6.3", iPad / iPhone / iPod touch and Android devices.Switch the input to [Panasonic APPLICATION], the idle screen will appear. Youcan confirm the SSID and KEY. The factory default value of the KEY can bechanged. For details, refer to the following “Detailed setup of [SIMPLE]“.[NORMAL][S-DIRECT]Use this setting when use the wireless LAN function via the software "WirelessManager ME6.3" of the supplied CD-ROM which supports Windows and Maccomputer.[M-DIRECT]Use this setting when the projector is used as a simple access point.Even if there is no access point, the connection is enabled. Select this settingwhen use the wireless LAN function via the application software which supportsiPad / iPhone / iPod touch and Android devices.For details, refer to the following "Detailed setup of [M-DIRECT]”.[USER1] / [USER2] /[USER3]To match your network environment, set the detailed setup of network.For details, refer to the following "Detailed setup of [USER1] / [USER2] /[USER3]".Notef Projectors that can be connected to [SIMPLE], [S-DIRECT] or [M-DIRECT] are up to 10.f When [WIRELESS LAN] is set to [SIMPLE], [S-DIRECT] or [M-DIRECT] and the input signal is other than [PanasonicAPPLICATION], the normal wireless connection is disabled.f Even if [WIRELESS LAN] is set to [SIMPLE], [S-DIRECT] or [M-DIRECT], when switch to input MIRRORING signal it will bedisabled.f For more information on how to use the application software "Wireless Manager ME6.3", refer to the operating instructions of"Wireless Manager ME6.3".f It is possible to project the images which are stored in iPad / iPhone / iPod touch / Android and are sent to the projector byusing the dedicated application. For more information on how to use the application software, refer to the application guidedescribed in the following URL.[iOS support site] http://panasonic.net/avc/projector/ios/[Android support site] http://panasonic.net/avc/projector/android/[WIRELESS DETAILED SETUP]You can configure more precise network settings, if you select [SIMPLE], or select [M-DIRECT] or [USER1] ~ [USER3] (user)in [NORMAL] for [WIRELESS LAN] in the network menu. For network settings, contact your network administrator.Detailed setup of [SIMPLE]Direct connection mode and compatible with all OS (Windows / Mac / iOS / Android etc.).1) Press the button when [SIMPLE] is selected.f The [WIRELESS DETAILED SETUP] screen is displayed.2) Press the button.f The [KEY] screen is displayed.3) Press asqw to change the key according to the instructions.[KEY] Setting a key for the access point. Input either 8 to 15 alphanumerics.4) Press as to select [OK], and press the button.r Default setting of [SIMPLE]fThe following setting is set before the projector leaves the factory.[KEY] proj + The last 4 digits of the network IDDetailed setup of [M-DIRECT]Use this setting when the projector is used as a simple access point. Even if there is no access point, you can still connect theprojector to computer via the infrastructure.ENGLISH - 89Chapter 4 Settings - [NETWORK/USB] menu