Panasonic PT-VW355N Operating Instructions Manual

Also see for PT-VW355N: Operating instructions

Contents

FAQPlease refer to the following items if you have problems with the wireless LAN connection.The wireless LAN connection is interrupted suddenly.f The picture may disappear or freeze depending on the radio wave environment. In such cases, please try the followingmeasures.- Please make the wireless LAN connection device close to the projector.- Place away from devices that can emit electromagnetic radiation, such as microwave ovens, game machines. Do not usethese devices if you are still unable to solve the problem.- If multiple wireless devices are connected with the same router, the bandwidth will be insufficient.- Please prevent from using the projector in a location prone to static electricity, such as on a carpet.f If it happens that the wireless LAN connection is cut off unexpectedly, please set [WIRELESS LAN] in the [NETWORK/USB] menu to [DISABLE], and then perform the wireless LAN connection again so that the wireless module will berestored to the normal state.In addition, please refer to the following items if you have problems with the MIRRORING connection.MIRRORING cannot be connected.f Is the [WIRELESS LAN] menu set to [DISABLE]?f Is the input source [MIRRORING] selected correctly?f Is [MEMORY VIEWER] or [Panasonic APPLICATION] selected in [CONNECTION LOCK] menu?Please change the setting.f Please check the setting of the Intel ® WiDi / Intel® Pro WiDi / Miracast compatible device. For details about the connectionmethod of MIRRORING, refer to the Operating Instructions of the Intel® WiDi / Intel® Pro WiDi / Miracast compatible device.f Are there any obstacles between the Intel ® WiDi / Intel® Pro WiDi / Miracast compatible device and the projector? Inaddition, is the Intel ® WiDi / Intel® Pro WiDi / Miracast compatible device far from the projector?Please remove the obstacles or make the Intel ® WiDi / Intel® Pro WiDi / Miracast compatible device close to the projector.f The column "Paired devices" will remain the connection information such as the Intel® WiDi / Intel® Pro WiDi / Miracastcompatible device etc., but you cannot reconnect with the screen, please connect with the devices that can be connectedfrom the list.f Cancel the sleep state or switch the log-on user of the Intel® WiDi / Intel® Pro WiDi / Miracast compatible device, theconnection may be failed.Turn off / on the wireless LAN of the device, or turn the device and the projector off and then on again.f If you cannot connect to the projector, or the projector is not existed in the available connection device list, you can try toswitch the [AUTONOMOUS GROUP OWNER] menu to [OFF] or [ON].Disconnected suddenly or Image cannot be updated.f If the MIRRORING idle screen is not displayed, the sound cannot be output, the connection is failed, please re-boot theprojector and then return the operation according to the following method.- Set [STANDBY MODE] to [ECO], turn off the power, and then turn on the power. (If [STANDBY MODE] is already set to[ECO], the procedure of the setting is not required.)- Please turn off the power and disconnect the power plug from the power outlet.- Please turn on the projector and the Intel ® WiDi / Intel® Pro WiDi / Miracast compatible device.The picture or sound of MIRRORING is distorted.f Set the wireless LAN connecting method to [SIMPLE], [S-DIRECT] or [M-DIRECT].f Since MIRRORING is connected wirelessly, the picture or sound may be distorted by the radio wave environment. In suchcases, please try the following measures.- Please make the Intel® WiDi / Intel® Pro WiDi / Miracast compatible device close to the projector.- Place away from devices that can emit electromagnetic radiation, such as microwave ovens, game machines. Do not usethese devices if you are still unable to solve the problem.- If multiple wireless devices are connected with the same router, the bandwidth will be insufficient.f If there is a problem with the content itself, the picture may be distorted, please confirm the content.f The picture or sound of MIRRORING is distorted depending on the Intel® WiDi / Intel® Pro WiDi / Miracast compatibledevice. It may be caused by the processing capability and the wireless transmission performance of the Intel ® WiDi / Intel®Pro WiDi / Miracast compatible device, and it is not a malfunction of the projector.The connection of MIRRORING will be interrupted if there is no operation after connecting with the MIRRORING.f Depending on the configuration of your Intel® WiDi / Intel® Pro WiDi / Miracast compatible device, the connection may belost in some time. Please check the saving power setting of the device.f The problem will be improved by updating the wireless driver and firmware. Please contact with the manufacturer for thetechnical support about the device.ENGLISH - 131Chapter 6 Maintenance - FAQ