[PROJECTOR SETUP] menuOn the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu.Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.fAfter selecting the item, press asqw to set.[STATUS]You can check the using status of the projector.1) Press as to select [STATUS].2) Press the button.f The [STATUS] screen is displayed.[SIGNAL] [NAME] Displays the name of input signal.[FREQUENCY] Displays the scanning frequency of input signal.[RUNTIME] * 1[PROJECTOR] Displays the current usage time of projector.[LAMP (ET-LAV300* 2 )] Displays the model No. of the replacement lamp unit for thisprojector.[NORMAL] Displays the lamp runtime when [LAMP POWER] is set to[NORMAL] by actual time.[ECO] Displays the lamp runtime when [LAMP POWER] is set to [ECO]by actual time.[SERIAL NUMBER] [PROJECTOR] Displays the serial number of the projector.*1 The following conversion is required to calculate the rough estimate for lamp replacement.Formula for lamp replacement time (rough estimate)A ×1 + B × 5/7f A : Runtime which is displayed in [STATUS] screen - [RUNTIME] - [LAMP] - [NORMAL]f B : Runtime which is displayed in [STATUS] screen - [RUNTIME] - [LAMP] - [ECO]*2 The model No. of the optional lamp unit is subject to change without prior notice.Notef If you attach a lamp unit used in a projector of a model different from the projector (PT-VW355N, PT-VX425N) to theprojector, or when the lamp unit used in the projector to a projector of a different model, the [RUNTIME] displayed in[STATUS] may differ from the actual time.[COMPUTER2 SELECT]Set whether to use the terminal.1) Press as to select [COMPUTER2 SELECT].2) Press qw to switch the item.f The items will switch each time you press the button.[COMPUTER2 IN] When input the computer signal.[COMPUTER1 OUT] Outputs the signal which have been input terminal.Notef The [COMPUTER2 SELECT] will be unavailable when [COMPUTER2] is selected as input source.ENGLISH - 77Chapter 4 Settings - [PROJECTOR SETUP] menu
