4) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Hides the warning message.[ON] Displays the warning message.[HDMI SIGNAL LEVEL]Switch the setting when the external equipment is connected to the terminal of the projector and the image is notprojected correctly.1) Press as to select [HDMI SIGNAL LEVEL].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Sets the signal level automatically.[64-940] Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the terminal.[0-1023]Select when the DVI terminal output of an external device (such as a computer) is connected tothe terminal via a conversion cable or similar cable.Select also when the HDMI terminal output of a computer or other device is connected to the terminal.Notef The optimal setting varies depending on the output setting of the connected external device. Refer to the operationinstruction of the external device regarding the output of the external device.f The displayed signal level is assumed when the input is 30 bits.[CLOSED CAPTION SETTING](Only for NTSC, 480i YCBCR input)Set the closed caption.Selecting the closed caption display1) Press as to select [CLOSED CAPTION SETTING].2) Press the button.f The [CLOSED CAPTION SETTING] screen is displayed.3) Press as to select [CLOSED CAPTION].4) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Closed captions are not displayed.[ON] Closed captions are displayed.f When [ON] is selected, proceed to Step 5).5) When the confirmation is displayed, select [OK], and press the button.Setting the closed caption mode1) Press as to select [CLOSED CAPTION SETTING].2) Press the button.f The [CLOSED CAPTION SETTING] screen is displayed.3) Press as to select [MODE].4) Press qw to switch the item.f The items will switch each time you press the button.[CC1] Displays CC1 data.[CC2] Displays CC2 data.ENGLISH - 71Chapter 4 Settings - [DISPLAY OPTION] menu