Dimensions113.0 (4-7/16")255.0 (10-1/32")352.0 (13-27/32")24.4 (31/32")98.0 (3-27/32")90.0 (3-17/32")326.0 (12-27/32") 198.0 (7-25/32")54.8 (2-5/32") Actual dimension may differ by product.WirelessLANCommunicationdistance Approx. 30 m (98'5") (depends on the usage environment)SecurityInfrastructure modeWPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit),WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC], EAP-FAST [MS-CHAPv2/GTC],EAP-TTLS [MD5/MS-CHAPv2])*1 When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], the networkfunction (both wireless LAN and wired LAN) cannot be used in standby mode.*2 When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NETWORK], only theWake on LAN function can be used in standby mode via wired LAN. When the [PROJECTOR SETUP] menu → [ECOMANAGEMENT] → [STANDBY MODE] is set to [NETWORK], the power consumption is normally within 6 W in standbystatus. If the input source was switched to [MEMORY VIEWER] or [Panasonic APPLICATION] before the projector turnsinto standby, the power consumption in standby status may be more than 6 W.*3 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.*4 For details of video signals that can be projected using this projector, refer to “List of compatible signals”. (x page 141)*5 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only*6 This is an average value. It may differ depending on individual product.*7 [LAMP POWER] will be switched to [ECO] automatically when the operating environment temperature is 35 °C to 40 °C.Notef The part numbers of accessories and separately sold components are subject to change without notice.148 - ENGLISHChapter 7 Appendix - Specifications